Custom LED Blinker Genie (Pair)

Custom LED Blinker Genie (Pair) * Allows for Run AND Turn operation of Single-Intensity (2-Wire) LED Blinkers. * Formerly called Magic Blinker. * New high-speed solid state design is compatible with all flasher relays. *- Built-in Stage I Load Equalizer helps prevent the no-blink or 4-way blink condition. * Comes as a complete kit with electrical connectors and detailed instructions. * Recommended accessories: Electronic LED Flasher Relay & OEM Blinker Connectors. * High-Power capability of 12A/ 180 Watts (2A/ 30 Watts recommended). * Low on-state resistance means your indicators will be as bright as possible. * Works with LED or incandescent indicators. * 1-Year Warranty & Satisfaction Guarantee. * Made in the USA. * Sold as a PAIR. The Custom LED "Blinker Genie" is designed to allow single filament light bulbs, single intensity LED assemblies, or any two-wire indicators to function as both running lights AND blinkers - at full brightness! Simply connect your two-wire incandescent or LED indicators on your motorcycle to the Custom LED Blinker Genie, and your indicator bulbs/LEDs will now stay on constantly as running lights, and blink when you engage the blinkers! (Note: the indicator will turn off for the duration of the blinker pulse - this is how the blinking is achieved.) The Custom LED Blinker Genie is designed to be as small as possible while being as versatile and robust as possible. The finished dimensions of the unit will measure less than 0.7" x 1.25" X 0.25" and can carry up to 12A of current (see specifications)! This ensures our product will work for any application (blinking your headlights individually, or powering one single LED signal for instance). To further ease installation and ensure dependability, the Custom LED Blinker Genie's are entirely water resistant. The Blinker Genie is applicable for any and all situations where a single filament lamp, or single brightness LED or LED cluster is desired to function as both a running light and a blinker light - provided that the running light will be on anytime you use the blinkers. This is always the case with motorcycles, but not necessarily with automobiles. For Automobile applications, please read the special not in the installation tab. One Blinker Genie controls up to 2A worth of indicators on a single blinker circuit in the recommended configuration. The Blinker Genie's are sold IN PAIRS. One will be required for each side of the motorcycle, for every 2A worth of switched indicator load (25W). For most applications, they are used in the front to drive two wire LED indicators. Technically, if you ran wires to the back, you could control the rear indicators with the Blinker Genie's as well. However, it is recommend that you use one Blinker Genie for each "corner" of the vehicle. The Blinker Genie's come with 7" leads, all required electrical connectors and detailed installation instructions!

Brand

Custom LED

Category

Lighting

Part number

MBLINK_REV3

Weight

0.1 lb